Panasonic th-32ef1e Operating Instructions Manual

Contents

47EnglishDate and timeSet date and time. ([- -] shows no programme is set.)[Date and time] - submenu screenDate and timeSetFRIDAY 10:002016/01/01Year 2016MonthDayHourMinute11100■ Set date and timeSelect [Year / Month / Day / Hour / Minute].Set the selected item.Date and timeSetFRIDAY 10:002016/01/01Year 2016MonthDayHourMinute11100Select [Set] and press .99:992015/01/01Date and timeSetFRIDAY 18:002016/02/05Year 2016MonthDayHourMinute25180Note● If the present date and time are not set, the timesettings for [Set up timer], [Screensaver], etc. cannotbe made.● The present date and time setting is reset in thefollowing case.When the main unit is left unattended for 7 days orlonger after the main unit is turned off with the power switch>, the power plug is removed, or powerfailure has occurred, etc.● Date and time cannot be set when [Year / Month /Day / Hour / Minute] are set to [- -].Network settingsSet when networking with a computer.[Network settings] submenu will be displayed.Network settingsNetwork controlEF1-00OffOffOffDisplay nameNetwork statusLAN setupAMX D. D.Crestron Connected™Reset■ [Network control]Set when controlling with the unit’s LAN terminal.[On]:Controls via LAN using the LAN terminal of theDisplay. The power indicator lights orange whenthe power is turned off with the remote control(standby).[Off]:Invalidates control with LAN terminal.(In this case, the power consumption of Standbycondition (when the power is turned off with theremote control) will be slightly reduced.)Note● When using the LAN control function for “UsingNetwork Function” (see page 57 ‒ 69), set thisfunction to [On].■ [Display name]The name of the Display that is shown on the networkcan be changed.