Panasonic th-32ef1e Operating Instructions Manual

Contents

English74[Child side]USB memory contentsfilelist.datR_Introduction.jpgR_Contents_Video1.wmvR_Contents_Video2.wmvR_Contents_Video3.wmvfilelist.dat (file list)GroupID:G01PHOTO_001:R_Introduction.jpgVIDEO_001:R_Contents_Video1.wmvVIDEO_002:R_Contents_Video2.wmvVIDEO_003:R_Contents_Video3.wmvPlay contentsFor the above setting example, the following contentswill be played on repeat (loop).[Parent side]1. L_Introduction.jpg (10 seconds)2. L_Contents_Video1.wmv (10 seconds)3. L_Contents_Video2.wmv (20 seconds)4. L_Contents_Video3.wmv (*1)[Child side]1. R_Introduction.jpg (10 seconds)2. R_Contents_Video1.wmv (10 seconds)3. R_Contents_Video2.wmv (20 seconds)4. R_Contents_Video3.wmv (*1)*1: Played for the duration of the play time of L_Contents_Video3.wmv (Parent side).■ USB memory contents checkYou can run a USB memory contents check in [USBmedia player settings] - [Scenario file check]. (see page49)If an error is present, the information is given with thefollowing details.A(B): CA: Name of the file with an errorB: Row with an errorC: Error codeNote● Shows leading error codes.Details of the detected errors are as follows.Errorcode Detail of the error1. No USB memory is inserted.2. scenario.dat/filelist.dat cannot be opened.3. There is an error in the contents ofscenario.dat/filelist.dat.4. The play file format is not supported.5. No play file exists.6. The necessary group ID for Multi MediaPlayer has not been specified.7. There are several identical file definitions.8. The scenario’s play time is over the limit.9. The file definition listed in the scenario isnot in the file list.10. The scenario contains 0 or over 1000 playfiles.11. There are 0 or over 1000 play files.(Single Media Player (Type 1) only)12. Only the group ID is listed on the file list.(Multi Media Player only)Supplementary noteThe USB memory contents check does not determinewhether or not a play file is playable.If a file cannot be played while Media Player is active,an error message will be displayed.When performing the synchronized playback on theMulti Media Player, check in the menu [USB mediaplayer settings] - [Scenario file check] that the file isplayable.Network environment (Multi MediaPlayer only)■ Example of setting up LAN connection andIP address / Subnet maskAs mentioned below, connect several units together withLAN cables and set up IP addresses / Subnet masks sothat all the displays exist on the same network.Parent IP address:Subnet mask:192.168.10.1255.255.255.0Child IP address:Subnet mask:192.168.10.2255.255.255.0Child IP address:Subnet mask:192.168.10.3255.255.255.0Child IP address:Subnet mask:192.168.10.4255.255.255.0