Pantum M6700 Series User Manual

Also see for M6700 Series: Faq Installation manual User guide Faq Faq

Contents

Pantum M6700 Series User Manual Manual pdf 131 page image

After all papers jammed are taken out according to the above steps, close the frontcover and tidy the papers in paper tray, then the printer will recover to printautomatically.• If the printer still does not start printing, please check that all the jammed paperinside the printer has been cleared.• If you cannot remove the jammed paper yourself, please contact your locaPantum authorized repair center or send the printer to the nearest Pantumauthorized service center for repair.l• Printer appearance may differ because of various models and functions, so theschematic diagram is only for your reference.14.1.4. A paper jam occurs on the automatic document feeder (ADF)1. Open the ADF's top cover.2. Remove the paper jammed from the ADF.4. After taking papers jammed out, install the duplex unit back and inspect other parts to theproduct. If it can be ensured that there are no jammed papers, open and close the front coverand then the printer will recover printing automatically.Note: