6.2.4.Recover factory settings via Web server1.Log in the embedded Web server (please refer to Chapter 6.1 for login method).2.Click "User Management" and input the correct “User name” and “Password”; then, click“Restore to Factory Settings”. After completion, the printer will reboot automatically.Note：• After factory settings of printer are recovered, user name of the administratorwill be recovered to admin and the login password will be recovered to 000000.• You can also recover factory settings via keys on the control panel of printer,please refer to Chapter 12.1.3.• If factory settings of your printer are recovered, the sleep time will be recoveredto 5min automatically.6.2.3.3.Configure the FTP address bookIf you want to scan a file to the FTP server, you need to configure the FTP address bookfirst.When scanning, you may send the image scanned to the FTP server.Before configuringthe FTP address book, you may need to ask your network administrator for the server IPaddress, port number, login name, password and server name.1. Log in the embedded Web server (please refer to Chapter 6.1 for login method).2. Click "Settings", "Machine Settings" and then "FTP Address Book" to enter the setting3. Click "Create" to pop out a window as below and set relevant parameters; after settingsinterface of FTP address book.completed, and then click "Apply".6.2.3.4.Sleep time setupThe default sleep time of printer is 5min and if you want to change it, you can set up via theembedded Web server (the printer installed via network connection).1. Log in the embedded Web server (please refer to Chapter 6.1 for login method).2. Click “Settings” – “Machine settings” – “System”.3. Select sleep time according to you need and then click “Apply”.46
