Pantum M6700 Series User Manual

Also see for M6700 Series: Faq Installation manual User guide Faq Faq

Contents

Pantum M6700 Series User Manual Manual pdf 57 page image

6.2.2.4.Wi-Fi Direct setup1. Click “Settings” – “Network settings” – “Wireless setup” – “Wi-Fi Direct”.1) The Wi-Fi Direct defaults to be disabled; to enable it, please select the connectionmethod "Auto" or "Manual" and then click "Apply".6.2.3.Machine setup6.2.3.1.Set up e-mail notificationI. Set up SMTP client1.Click “Settings” – “Network settings” – “Protocol Settings” – “SMTP”.2.On SMTP page, input SMTP server address, set up the mailbox login nameand password and then click “Apply”.II. Add recipient addressYou can add mail address contacts, set up e-mail notification, set up sleep time and recoverfactory settings via machine setup page.If you set up e-mail notification, an e-mail will be sent to the mail address specified by youwhen abnormality such as paper out occurs. You can receive emails only if you made correctemail setup. Please consult your network administrator for detailed setup steps. You need tolog in the embedded Web server before setting up email notification (please refer toChapter 6.1 for login method).1.Click “Settings” – “Machine settings” – “Address Book” .2.Click “Add”, input recipient address and then click “Apply”.III. Set up email notification1.Click “Settings” – “Machine settings” – “E-mail Notification”.2.Click button and select the email addresses you want to add in the list of contactspopping out.You can also tick “address X” (such as address 1) and input the email addresses youwant to add.3.Tick the email addresses and notification contents you want to notify and then click “Apply”.Note：• If Auto selected, the mobile terminal will realize automatic connection upon•initiating the connection invitation without the need of confirmation on panel.If Manual selected, the mobile terminal cannot realize connection untilinitiating the connection invitation prior to confirmation on panel.Note：• If some groups have been created, you may click to check a correspondinggroup to add the newly created e-mail address into it.6.2.3.2.Configure the E-mail address bookIf you want to scan a file to an e-mail address, you need to configure the e-mail address bookfirst and then scan the file to the assigned e-mail address.The e-mail will not be receivedbefore proper setting on the e-mail box; for specific setting steps, please consult your networkadministrator.I. Set the E-mail address bookLog in the embedded Web server (please refer to Chapter 6.1 for login method).Click “Settings” – “Machine settings” – “System”.1.2.3.Click "Create" to pop out a window as below and edit the contact name and input the e-mailaddress, and then click "Apply".44