8. Click “Continue Installation” on the prompt window popping out.9. The system will finish driver installation automatically.• If USB cable is used to connect the computer and Wi-Fi model, the window to promptwireless network setup will pop out during driver installation process, as shown in thediagram above. Click “Yes” to set up the wireless network of printer with wireless networksetup tool (refer to Chapter 5.1.1).• If USB cable is not used to connect computer with Wi-Fi model or non Wi-Fimodel, the prompt window of wireless network setup will not pop out.10.Click “Restart” and wait for computer restart to finish installation.Note： • If the printer and computer have been connected with USB cable, the USBconnection mode will be added to the printer automatically after computer isrestarted.3.3.Add printer to Mac system3.3.1.Add in USB connection mode1. Connect the printer to computer with USB cable and then turn power on.2. Enter the “System Preferences” – “Printers & Scanners” of computer.3. Click button to select “Add Printer or Scanner”.4. Select printer and then select the corresponding printer mode from the “Use” menupopping out.5. Click “Add”.3.3.2.Addition in wired network connection mode1. Turn the power of printer and computer on.2. Connect the computer to wired network.3.Connect the network cable to the network interface of printer, and make sure the printer isconnected to the computer network (Please refer to Chapter 4 for network setup).4. Enter the “System Preferences” – “Printers & Scanners” of computer.5. Click button to select “Add Printer or Scanner”.6. Select printer and then select the corresponding printer mode from the “Use” menupopping out.7. Click “Add”.30
