5. Wireless network setup (applicable to Wi-Fi models)Wireless network connection type is divided into basic structure mode and Wi-Fi Direct mode.If you have problems with wireless network setup, please refer to Chapter 5.3 WirelessNetwork Setup FAQs.Basic structure mode: connecting to a wirelessdevice via router1. Access point (wireless router)2. Wireless network printer3. Computer connecting to access point viawireless network4. Computer connecting to access point vianetwork cableWi-Fi Direct mode: wireless client is connecting toa printer with Wi-Fi function1. Wireless network printer2. Wireless client is directly connecting to awireless network printer5.1.Basic structure modeYou can connect a computer to your printer via access point (wireless router) as the medium.Access point (wireless router) connection is divided into wireless network setup and Wi-FiProtected Setup (WPS).Note: · The machine with the fax feature supports automatic search of wireless networkthrough the printer's control panel to select the wireless network you desire andthen input its password for connection.Important: Before wireless network installation, you must learn about the service setidentifier (SSID) and password of your access point in order to use them during wirelessnetwork setup. If they cannot be determined, please consult your network administrator oraccess point (wireless router) manufacturer.5.1.1.Wireless network setup toolsIf your computer has been installed with a driver and had been connected to wireless network,but the wireless network was changed, you can set it again with wireless network setup tools.33
