8. The system starts to install driver, and it may take several minutes.9. After installation is finished, “Installation Complete” interface will pop out, and it willbe closed automatically in about 3s.3.1.4.Driver uninstallation1. Click the Start menu of computer and then click All programs.2. Click Pantum, and then Click Pantum X Series.Pantum X Series where X represents product model.3. Click uninstall to delete the driver according to instructions on uninstall window.4. Restart computer after finishing unloading.3.2.Driver installation based on Mac system• Driver installation under Mac system is divided into 2 steps, driver installation and addinga printer. If you are going to print in AirPrint mode, there is no need to install a driver andyou just need to add a printer directly.• When you are installing a driver with wired or wireless network, you may need to knowthe Bonjour name of printer. Please print the “Network setup page” to view it.(Pleaserefer to Chapter 12.4).3.2.1.Driver installation1. Turn the power of printer and computer on.2. Insert the CD companying with printer in the CD driver of your computer, and doubleclick Pantum X Series installation package. (X in Pantum X Series represents productmodel.)Mac 10.11 is taken as the example in the following operation. The information on yourcomputer screen may differ because of multiple operating systems.3.1.4.1.Uninstallation methodWindows 7 is taken as the example in the following operation. The information on yourcomputer screen may differ because of multiple operating systems.28
