C o m m a n d L i n e I n t e r f a c e 6-5interfaceKeyword identifying the interface: ETHERNET | ADSL | XDSL | SDSLportPort number (1 to 8)set lan ipaddressSets the LAN IP address. If you do not enter any optional parameters, theIAD sets the address on the first available slot, interface, port and connection.If connection is omitted, the first is used.set lan ip address (slot)(interface) (port) (connection)IP addressIP address in decimal format (999.999.999.999)netmaskSubnet mask in decimal format (255.255.255.255)slotSlot number (1 to 7)interfaceKeyword identifying the interface: ETHERNET | ADSL | XDSL | SDSLportPort number (1 to 8)connectionIndex of this IP address associated with the port (0-7)set lan rip Enables or disables RIP on a LAN IP port. If you do not enter any optionalparameters, the IAD performs the command against the first available slot,interface and port.set lan rip | off> (1 | 2Bcst | 2Mlti)>(slot) (interface) (port)on | offKeyword to enable (on) or disable (off) RIP on the specified port.version 1 | 2Bcst | 2MltiKeyword identifying version to implement. (Must be preceded by keywordversion)slotSlot number (1 to 7)interfaceKeyword identifying the interface: ethernet | adsl | xdsl | sdsl
