C o n f i g u r a t i o n 4-43CopperComWhen your IAD is configured for connection to a Coppercom Voice Gateway(option “V” on the VoicePath Configuration menu − P-V), type “E” on theMain menu (Figure 2.2) to display the CopperCom Call Control menu.Figure 4.36 CopperCom Call Control MenuEach option on this menu is described in detail below.Statistics Type “S” on the CopperCom Call Control menu to display the CopperComStatistics menu.Figure 4.37 CopperCom Statistics MenuEach of the options on this menu is described in detail below.Display Statistics1 Type “D” to display CopperCom statistics.Clear CopperCom Statistics2 Type “A” to reset CopperCom statistics. The IAD sets the statistics to zeroand redisplays the CopperCom Statistics menu.Press Escape to return to the CopperCom Call Control menu.Clear StatisticsType “C” to clear CopperCom statistics.Configure Type “C” on the CopperCom Call Control menu to display the CopperComConfiguration menu.Figure 4.38 CopperCom Configuration Menu
