A d m i n i s t r a t i o n 3-73 Continue with other SNMP settings, or press Escape to return to the Mainmenu.4 Reset the IAD.Enable/Disable SNMP via EOCTo Enable or Disable SNMP via EOC, follow the steps below.1 Type “F” on the SNMP Configuration menu to enable or disable SNMP viaEOC. The IAD displays the current status of SNMP.2 To enable SNMP, type “E” or type “D” to disable. The IAD saves theconfiguration (if changed).3 Continue with other SNMP settings, or press Escape to return to the Mainmenu.4 Reset the IAD.Enable SNMP via Both IP and EOCTo Enable SNMP via Both IP and EOC, follow the steps below.1 Type “A” on the SNMP Configuration menu to enable SNMP via IP andEOC. The IAD saves the configuration.2 Continue with other SNMP settings, or press Escape to return to the Mainmenu.3 Reset the IAD.Disable SNMP via Both IP and EOCTo Disable SNMP via both IP and EOC, follow the steps below.1 Type “B” on the SNMP configuration menu to disable SNMP via IP andEOC. The IAD saves the configuration.2 Continue with other SNMP settings, or press Escape to return to the Mainmenu.3 Reset the IAD.Configure System ContactTo configure the System Contact, follow the steps below.1 Type “P” on the SNMP Configuration menu to configure system contact(up to 39 alphanumeric characters). The IAD displays the current systemcontact and prompts you to enter a new one.2 Type the name of the new contact person or department and press Enter.The IAD save the configuration.3 Continue with other SNMP settings, or press Escape to return to the Mainmenu.4 Reset the IAD.
