Setting up Compax3 C3F_T4042 192-121102 N04 June 2008Configuration sequence:The Compax3 ServoManager can be installed directly from the Compax3DVD. Click on the appropriate hyperlink or start the installation program"C3Mgr_Setup_V.... .exe" and follow the instructions.PC requirementsRecommendation:Operating system: MS Windows XP SP2 / MS Windows 2000 as from SP4 / (MS Vista)Browser: MS Internet Explorer 6.xProcessor: Intel Pentium 4 / Intel Core 2 Duo / AMD Athlon class as from>=2GHzRAM memory: >= 1024MBHard disk: >= 20GB available memoryDrive: DVD driveMonitor: Resolution 1024x768 or higherGraphics card: on onboard graphics (for performance reasons)Interface: USBMinimum requirements:Operating system: MS Windows XP SP2 / MS Windows 2000 as from SP4Browser: MS Internet Explorer 6.xProcessor: >= 1.5GHzRAM memory: 512MBHard disk: 10GB available memoryDrive: DVD driveMonitor: Resolution 1024x768 or higherGraphics card: on onboard graphics (for performance reasons)Interface: USBNote: For the installation of the software you need administrator authorization on thetarget computer. Several applications running parallelly, reduce the performance and operability. especially customer applications, exchanging standard system components(drivers) in order to improve their own performance, may have a strong influenceon the communication performance or even render normal use impossible. Operation under virtual machines such as Vware Workstation 6/ MS Virtual PC isnot possible. Onboard graphics card solutions reduce the system performance by up to 20%and cannot be recommended. Operation with notebooks in current-saving mode may lead, in individual cases,to communication problems.Installation of the C3ServoManager
