Specifications C3F_T40458 192-121102 N04 June 2008T40 Functions: CamGeneral Cam control function Programmable based on IEC61131-3 Position of selected master signal sourcevia: Encoder, Step / directionor +/-10V analog HEDA Virtual MasterCam memory 10.000 interpolation points(master / slave in 24 bit format)saved failure save. Distance of interpolation points can beadapted to curve (non equidistantinterpolation points) Linear interpolation between pointsLinking curve segments Up to 20 cam segments can beproduced. Virtually random cam links (forwards andbackwards) Freely programmable, event-triggeredcurve branching. Scalable cam segments and completecam profilesCoupling and decoupling functions With the aid of a quadratic function. By means of a change-over function Without overspeeding by coupling overseveral master cycles. Virtually free set-up of the coupling anddecoupling movement master-guided coupling movement. Random standstill positionMark synchronization Master or slave oriented (simultaneous,cam-independent). highly precise mark recognition (accuracy< 1 μs)Cam generation with renowned Noltetool. Standard or extended range of functions evaluation of the motion profiles.COM portsRS232 115200 baud Word length: 8 bits, 1 start bit, 1 stop bit Hardware handshake XON, XOFFRS485 (2 or 4-wire) 9600, 19200, 38400, 57600 or 115200baud Word length 7/8 bit, 1 start bit, 1 stop bit Parity (can be switched off) even/odd 2 or 4-wireUSB (Compax3M) USB 2.0 Full Speed compatible
