6 – SANsurfer Control iXGetting StartedIS0053302-00 7 PRELIMINARY 6-21QNOTE: The default SANsurfer Control iX application access password is config.Change this password after installation to ensure that security is notcompromised.Perform the following steps to set the application access password for a host:1. In the SANsurfer Control iX main window HBA tree, select the host for whichyou want to set the application access password.2. Click the Host Security tab. The Host Security tabbed page displays (seefigure 6-22). The host name displays at the top of the tabbed page.Figure 6-22. Host Security Tabbed Page3. In the Update Application Configuration Access section, do the following tomodify the SANsurfer Control iX application access password:a. In the Old Password box, type the current password.b. In the New Password box, type the new password.c. In the Verify Password box, type the new password again to confirm thenew password.4. Do one of the following:❑ Click Apply to update the application access password.❑ Click Clear Fields to clear the typed entries in the Host Security tabbedpage text boxes.
