RCA L26HD32D Owner's Manual

Also see for EN-V L32HD32D: Specifications Specifications

16NOTE:Memorizing channels is best accomplished duringevening “PRIMETIME” hours, as more stations arebroadcasting digital signals. Memorizing channelscan only be accomplished while a station isbroadcasting a digital signal to set that channel intomemory.If you are unsure of the digital channels availablein your area, you may visit www.antennaweb.org toreceive a list based on your address or zip code.New digital channels may be added to your areaperiodically, it is recommended to perform the“Automatic Search” procedure regularly.Adding ChannelIf you find a new channel unregistered, you can addthe new channel into the channel memory.1 Tune in the new channel.2 Press SETUP/TV MENU in the TV mode. The TVmenu screen will appear.3 Press ϳ or ϴ to select “Channel”, then press ϶ orENTER.4 Press ϳ or ϴ to select “Add/Delete”, then press ϶or ENTER.Add/Delete >>Clear All >>Add/DeleteAdding Channel >>: Select ENTER:Set5 Press ϳ or ϴ to select “Adding Channel”, thenpress ϶ or ENTER. The new channel will beadded into the channel memory.6 Press EXIT/CANCEL to return to the normalscreen.Add/Delete channelYou can select the channel that you want to skip.1 Press SETUP/TV MENU in the TV mode. The TVmenu screen will appear.2 Press ϳ or ϴ to select “Channel”, then press ϶ orENTER.3 Press ϳ or ϴ to select “Add/Delete”, then press϶ or ENTER.4 Press ϳ or ϴ to select “Add/Delete”, then press϶ or ENTER.5 Press ϳ or ϴ to select the channel that you wantto skip.CH Signal2 Analog3 Analog Add3-001 Digital Delete3-002 Digital Add4 Analog DeleteAdd/Delete: AdjustAdd: Select6 Press ϵ or ϶ to select “Add” or “Delete”,whichever function you want to perform.7 Repeat steps 5 - 6 for other channels you want toadd or delete.•••8 Press EXIT/CANCEL to return to the normalscreen.Clear AllAll channels are deleted from the channel memory.1 Press SETUP/TV MENU in the TV mode. The TVmenu screen will appear.2 Press ϳ or ϴ to select “Channel”, then press ϶ orENTER.3 Press ϳ or ϴ to select “Add/Delete”, then press ϶or ENTER.4 Press ϳ or ϴ to select “Clear All”, then press ϶ orENTER.Add/Delete >>Add/DeleteAdding Channel >>: Select ENTER:SetClear All >>5 Press EXIT/CANCEL to return to the normalscreen.TV operation1 To turn on the TV, press POWER.(POWER indicator on the front of the unitchanges green. It may take approx. 10 secondsfor a picture to appear on screen.)2 Adjust the volume level by pressing VOL + or – .The volume level will be indicated on the screenby blue bars. As the volume level increases, so dothe number of bars. If the volume decreases, thenumber of blue bars also decreases.3 Set the Signal Type option to the appropriateposition (see “Air/Cable selection” on page 15).4 Press the Direct Channel Selection (0-9, –)buttons to select the channel.(If you press only channel number, channelselection will be delayed for a few seconds.)TO SELECT ANALOG CHANNELS1-9: Press 1-9 as needed. Example, toselect channel 2, press 2.10-99: Press the 2 digits in order. Example, toselect channel 12, press 1, 2.100-125: Press the 3 digits in order. Example, toselect channel 120, press 1, 2, 0.TO SELECT DIGITAL CHANNELSPress the first 3 digits, then press the – button,followed by the remaining number.Example, to select channel 015-001, press 0, 1,5, –, 0, 0, 1.If a channel is selected with only audio content,“Audio only” will be displayed on the screen.If a channel is selected with a weak digitalsignal, “Digital channel signal strength is low”will be displayed on the screen.The same program may be available on eitheran analog channel or a digital channel. You maychoose to watch either format.If a channel is selected to which you have notsubscribed, “Digital channel is encrypted” willbe displayed on the screen.•••51F0101A_eng.indd 16 3/5/08 5:05:53 PM