RCA L26HD32D Owner's Manual

Also see for EN-V L32HD32D: Specifications Specifications

36YPBPRTo connect the LCD TV/DVD to a VCR with an S-Video cordIf you connect a VCR with a S-Video cable to the S-VIDEO IN jack on the rear side of the unit, you must alsoconnect the audio cables to the LINE 1 AUDIO IN jacks on the rear side of the unit.The S-Video cable only carries the video signal. The audio signal is separate.NOTE:When the S-Video cable and the standard video cable are connected at the same time, the S-Video cabletakes precedence.•The exact arrangement you use to interconnect various video and audio components to this unit is dependenton the model and features of each component. Check the Owner’s Manual provided with each component forthe location of video and audio inputs and outputs.To connect the LCD TV/DVD to a VCRConnections to other equipmentTo connect to a DVD player with Component Video InputYou can enjoy a high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks of your DVDplayer with the COMPONENT video cables (not supplied).Rear of the unitTo Audio/Video OUTAudio/Video cord(not supplied)To LINE 2 VIDEO/AUDIO INTo S-Video OUTTo Audio OUTAudio cord (not supplied)S-Video cord (not supplied)To S-VIDEO INTo LINE 1 AUDIO INRear of the unitTo Component OUTAudio cord (not supplied)Component video cord(not supplied)To LINE 2 AUDIO INRear of the unit To COMPONENT INTo Audio OUTNOTE:Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and480p/720p progressive signals.•VCRVCRDVDTo LINE 1 VIDEO/AUDIO INor51F0101A_eng.indd 36 3/10/08 10:56:11 AM