RCA L26HD32D Owner's Manual

Also see for EN-V L32HD32D: Specifications Specifications

37To connect a HDMI or a DVI device to the unitThe HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digitalvideo from a DVI device.When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separateanalog audio cords required.Connections to other equipment (continued)Using an AV Amplifier with built-in digital surroundIf you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems includingDolby Digital Surround audio that sounds just like the movie.Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. asshown below.Rear of the unitCoaxial digital cable(not supplied)AV Amplifier with built-in digital surrounddecoder as listed aboveCenter SpeakerCoaxial DigitalAudio OutputTo CoaxialDigital Audio InputRear of the unitFrontSpeaker(Left)FrontSpeaker(Right)SubwooferSurroundSpeaker (Left)SurroundSpeaker(Right)TV/DVDNOTE:When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio.There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.Coaxial digital audio output is active only when receiving digital broadcasting, not when receiving analogbroadcasting.••HDMI - to - DVI adapter cable(HDMI type A connector)(not supplied)Audio cord (not supplied)HDMI cable (type A connector)(not supplied)To DVI outputTo HDMI outorHDMI deviceDVI deviceTo HDMI 1/DVI INTo HDMI 2 (or HDMI 1/DVI) INTo PC/DVI AUDIO INNOTE:When you connect a DVI device, you must connect only with HDMI 1/DVI.When using HDMI 1 to connect your HDMI or DVI devices, you must select the corresponding audioinput source (HDMI or DVI) on the menu screen (see ”Selecting the HDMI audio input source” onpage 24). Otherwise you will only see the image with no sound.If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using an HDMI cableor a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. Toreceive the picture you must change the output resolution on the external component.Should you require further instruction, please contact the manufacturer of the external component.••51F0101A_eng.indd 37 3/10/08 10:56:11 AM