RCA L26HD32D Owner's Manual

Also see for EN-V L32HD32D: Specifications Specifications

28JPEG playback:1 In the file browser, pressϳ/ϴ to select the desiredJPEG file.To display a thumbnail list, press DVD MENU.Press ϳ/ϴ/ϵ/϶ to select the desired file.(To return to the file browser, press TOP MENU.)Picture-01Picture-02Picture-03Picture-04Picture-05Picture-06Picture-07Picture-08JPEG PreviewSelect FilesRepeat :OffMode :OffW: 2048 H: 1536/Picture-01.JPG2 Press ENTER or PLAY.The selected picture appears on the TV screen.Rotating an imageYou can rotate an image by 90 degrees.Press ANGLE during playback of the image.“ ”, “ ”, “ ” or “ ” appears on the screen.Zooming an imageZoom function also can be used in viewing JPEGfiles.Press ZOOM (See “Zooming” on page 29).3 Press STOP to end playback.The file browser appears on the TV screen.If you want to watch the other file, repeat steps1-2.Select FilesThe file type to make it display in the file browser canbe chosen.1 Press ϵ/϶ to select “Select Files” at right columnin the file browser.Press ENTER, then press ϳ/ϴ to select filetype from the list (Music or Picture).•2 Press ENTER to add/remove check mark.Checked file type will be displayed in the filebrowser.3 Press RETURN to save the setting.Setting the JPEGintervalYou can continuously play back all JPEG filesautomatically.1 Press SETUP/TV MENU in the stop mode.Press ϳ or ϴ to select option, then pressϵ/϶ or ENTER.2 Press ϳ or ϴ to select “JPEG Interval”, then press϶ or ENTER.3 Press ϳ or ϴ to select your desired time, thenpress ENTER.TV Screen :Display : OnPicture Mode : AutoJPEG Interval Off5 Seconds10 Seconds15 Seconds: 16:9Off:Plays back one file at a time.5 Seconds:Plays back images in the form of a slide show at 5second intervals.10 Seconds:Plays back images in the form of a slide show at10 second intervals.15 Seconds:Plays back images in the form of a slide show in15 second intervals.4 Press SETUP/TV MENU to remove the menuscreen.Program playback (CD)You can arrange the order of tracks on the disc.1 In the file browser, press ϳ/ϴ/ϵ/϶ to select “EditMode”, then press ENTER.When “Edit Mode” is black color, you can markthe files which you want to add into Program list.Folder-1Folder-2MP3-1MP3-2MP3-3WMA-1WMA-2WMA-3JPEG PreviewRepeat :OffMode :OffEdit Mode2 Press ϳ/ϴ/ϵ/϶ to select the file you want to addinto the program list.Press ENTER. Selected file was marked.Repeat this procedure to select the other files.Folder-1Folder-2MP3-1MP3-2MP3-3WMA-1WMA-2WMA-3JPEG PreviewRepeat :OffMode :OffEdit Mode/MP3-1.MP33 Press ϳ/ϴ/ϵ/϶ to select “Add To Program”.Then press ENTER. All marked files are addedinto the program list.When you finish storing the files you want into theProgram list, select “Edit Mode” again and pressENTER to release edit mode.51F0101A_eng.indd 28 3/5/08 5:06:01 PM