RCA L26HD32D Owner's Manual

Also see for EN-V L32HD32D: Specifications Specifications

331 Press SETUP/TV MENU in the stop mode or NoDisc.Press ϳ or ϴ to select option, then press ϵ/϶or ENTER.2 Press ϳ or ϴ to select “Picture Mode”, then press϶ or ENTER.3 Press ϳ or ϴ to select your desired picture mode,then press ENTER.TV Screen :: OnDisplayPicture ModeJPEG IntervalAutoFilmVideo: 16:9Auto:Select this position normally.The DVD player automatically detects sourcecontent, film or video, of playback source.Film:Suitable for playback of film content pictures.Video:Suitable for playback of video content pictures.4 Press SETUP/TV MENU to remove the menuscreen.NOTE:Depending on the disc, pictures may be cut off ordoubled. In this case, select “Video”.Night ModeNight Mode enables you to control the dynamicrange so as to achieve a suitable sound for yourequipment.1 Press SETUP/TV MENU in the stop mode or NoDisc.Press ϳ or ϴ to select option, then pressϵ/϶ or ENTER.2 Press ϳ or ϴ to select “Night Mode”, then press϶ or ENTER.3 Press ϳ or ϴ to select “On” or “Off”, then pressENTER.On : Loud sounds such as explosions are toneddown slightly when played.Off : The unit will play the disc as recorded.Digital OutOffOnNight Mode4 Press SETUP/TV MENU to remove the menuscreen.•Digital OutYou can select the digital output sound formatcorresponding to your system connection.1 Press SETUP/TV MENU in the stop mode or NoDisc.Press ϳ or ϴ to select option, then pressϵ/϶ or ENTER.2 Press ϳ or ϴ to select “Digital Out”, then press ϶or ENTER.3 Press ϳ or ϴ to select “Off”, “PCM” or “Bitstream”,then press ENTER.: OffNight ModeDigital Out OffPCMBitstreamOff: There is no sound output fromDIGITAL AUDIO OUT jack.PCM: Change Dolby Digital to PCM for theoutput. Select when connected to a 2channel digital stereo amplifier.Bitstream: Disc audio bitstream data will beoutput.4 Press SETUP/TV MENU to remove the menuscreen.NOTE:This function works only during playback of DolbyDigital recorded discs.The level of Dynamic Range Reduction may differdepending on DVD video disc.Even if you select “Bitstream”, MPEG audio will beoutput in PCM format.Parental controlSome discs are specified not suitable forchildren. Such discs can be limited not to playback with the unit.Password and setting:1 Press SETUP/TV MENU in the stop mode or NoDisc.Press ϳ or ϴ to select option, then pressϵ/϶ or ENTER.2 Press ϳ or ϴ to select “Parental”, then press ϶ orENTER.“Enter Password” screen will appear.3 Press “0000” using Number buttons (0-9). (Thisis pre-setting password of this unit). Then pressENTER.If you input a wrong number, press EXIT/CANCEL.••••51F0101A_eng.indd 33 3/5/08 5:06:06 PM