RCA L26HD32D Owner's Manual

Also see for EN-V L32HD32D: Specifications Specifications

183 Press ϳ or ϴ to select “Ch Label”, then press ϶or ENTER.The “Ch Label” menu will appear.4 Press ϵ or ϶ to select a channel you want tolabel, then press ϴ.Ch LabelLabel Clear >>: AdjustCh LabelChannel Number 15-1: Select5 Press ϵ or ϶ repeatedly until the character youwant appears in the first space.Label Clear >>: AdjustCh LabelChannel Number 15-1: SelectCh Label AENTER:SetThe characters rotation as follows:SPACE- , () @ / + = -If the character which you desire appears, pressENTER.Repeat this step to enter the rest of thecharacters.If you would like a blank space in the label name,you must choose the empty space from the list ofcharacters.6 When you finish inputting the label name, pressEXIT/CANCEL to return to the normal screen.7 Repeat steps 4-5 for other channel. You canassign a label to each channel.To clear a Ch LabelAfter step 4 above, press ϳ or ϴ to select “LabelClear”, then press ϶ or ENTER.NOTE:The channel labels will be reset after “AutomaticSearch” on page 15.Labeling video inputsThe Video Label feature allows you to label eachinput source for your TV.1 Press SETUP/TV MENU in the TV mode. The TVmenu screen will appear.2 Press ϳ or ϴ to select “Setup”, then press ϶ orENTER.3 Press ϳ or ϴ to select “Video Label”, then press϶ or ENTER.4 Press ϳ or ϴ to select an input which you want tolabel.5 Press ϵ or ϶ to select the desired label for thatinput source.•Video2 -Component -HDMI1 -HDMI2 -Video Label: Adjust: SelectVideo1 -– : Uses the default label nameVCR : Video cassette recorderDVD : DVD videoDTV : Digital TV set-top boxSAT : Satellite boxCBL : Cable boxHD : HDMI device (only for HDMI inputs)6 Press EXIT/CANCEL to return to the normalscreen.Setting the V-ChipAn age limitation can be set to restrict childrenfrom viewing or hearing violent scenes orpictures that you may choose to exclude. Therestriction applies to “TV Rating” and “MovieRating” if this data is transmitted. You may setthis restriction separately. To use the V-Chipfunction, you must register a password.To register a password1 Press SETUP/TV MENU in the TV mode. The TVmenu screen will appear.2 Press ϳ or ϴ to select “Lock”, then press ϶ orENTER.3 Select and enter your password (4 digits) usingNumber buttons (0-9), then press ENTER.[0-9]LockNew Password * * *_: Select ENTER:Set“ ” appears instead of the number.4 Enter the same password again to confirm, thenpress ENTER.The password is now registered.NOTE:If you forget your password, you can reset it. Turnthe volume all the way down using VOLUME – onthe TV. Continue holding the button and press 0on the remote control at the same time for about 5seconds. Enter a new password.To avoid forgetting the password, write it down andkeep in a safe place.To set the V-Chip1 Press SETUP/TV MENU in the TV mode. The TVmenu screen will appear.2 Press ϳ or ϴ to select “Lock” menu, then press϶ or ENTER.3 Use Number buttons (0-9) to enter yourpassword, then press ENTER. Then Lock menuwill appear.••51F0101A_eng.indd 18 3/5/08 5:05:54 PM