Chapter 7: Device Management125 128 Kilobit5. Click OK to apply the LAN settings.Device Services1. Choose Device Settings > Device Services. The Device ServiceSettings page appears.2. Enter the Discovery Port.The Dominion KX II discovery occurs over a single, configurable TCPPort. The default is Port 5000, but you can configure it to use anyTCP port except 80 and 443. To access the Dominion KX II frombeyond a firewall, your firewall settings must enable two-waycommunication through the default Port 5000 or a non-default portconfigured here.3. Select Enable SSH Access to allow administrators to access theDominion KX II via the SSH v2 application.4. Enter the SSH Port information.The standard SSH TCP port number is 22 but the port number canbe changed to provide a higher level of security operations.Modem SettingsTo configure modem settings:1. Click Device Settings > Modem Settings to open the Modem Settingspage.2. Select the Enable Modem checkbox. This will enable the Serial LineSpeed and Modem Init String field.3. The Serial Line Speed of the modem is set to 115200. Read-only
