Chapter 12: Command Line Interface (CLI)211Accessing the Dominion KX II Using CLIAccess the Dominion KX II by using one of the following methods:• Telnet via IP connection• SSH (Secure Shell) via IP connection• Local Port-via RS-232 serial interfaceA number of SSH/Telnet clients are available and can be obtained fromthe following locations:• Putty - http://www.chiark.greenend.org.uk/~sgtatham/putty/http://www.chiark.greenend.org.uk/~sgtatham/putty/• SSH Client from ssh.com - www.ssh.com http://www.ssh.com• Applet SSH Client - www.netspace.org/sshhttp://www.netspace.org/ssh• OpenSSH Client - www.openssh.org http://www.openssh.orgSSH Connection to the Dominion KX IIUse any SSH client that supports SSHv2 to connect to the Dominion KXII. You must enable SSH access from the Devices Services page.Note: For security reasons, SSH V1 connections are not supported bythe Dominion KX II.SSH Access from a Windows PCTo open an SSH session from a Windows PC:1. Launch the SSH client software.2. Enter the IP address of the Dominion KX II server. For example,192.168.0.192.3. Choose SSH, which uses the default configuration port 22.4. Click Open.The login as: prompt appears.See Logging In (on page 213).Note: Both IPv4 and IPv6 addresses are supported.
