Chapter 10: Maintenance199For information about upgrading the device firmware using theMulti-Platform Client, see Upgrading Device Firmware in the KVM andSerial Client Guide.Note: Firmware upgrades are not supported via modem.Upgrade HistoryThe Dominion KX II provides information about upgrades performed onthe Dominion KX II and attached CIMS.To view the upgrade history:• Choose Maintenance > Upgrade History. The Upgrade History pageopens.Information is provided about the Dominion KX II upgrade(s) that havebeen run, the final status of the upgrade, the start and end times, and theprevious and current firmware versions. Information is also providedabout the CIMS, which can be obtained by clicking the show link for anupgrade. The CIM information provided is:• Type - The type of CIM.• Port - The port where the CIM is connected.• User - The user who performed the upgrade.• IP - IP address firmware location.• Start Time - Start time of the upgrade.• End Time - end time of the upgrade.• Previous Version - Previous CIM firmware version.• Upgrade Version - Current CIM firmware version.• CIMs - Upgraded CIMs.• Result - The result of the upgrade (success or fail).RebootingThe Reboot page provides a safe and controlled way to reboot yourDominion KX II. This is the recommended method for rebooting.Important: All KVM and serial connections will be closed and all
