Chapter 10: Maintenance1973. Click the Upgrade button. You are prompted to confirm the upgrade.4. Click OK to continue the upgrade. Progress bars are displayedduring the upgrade. Upgrading takes approximately 2 minutes or lessper CIM.Upgrading FirmwareUse the Firmware Upgrade page to upgrade the firmware for yourDominion KX II and all attached CIMs. This page is available in theDominion KX II Remote Console only.Important: Do not turn off your Dominion KX II unit or disconnectCIMs while the upgrade is in progress - doing so will likely result indamage to the unit or CIMs.To upgrade your Dominion KX II unit:1. Locate the appropriate Raritan firmware distribution file (*.RFP) onthe Raritan website http://www.raritan.com on the FirmwareUpgrades web page.2. Unzip the file. Please read all instructions included in the firmwareZIP files carefully before upgrading.Note: Copy the firmware update file to a local PC before uploading.Do not load the file from a network drive.3. Choose Maintenance > Firmware Upgrade. The Firmware Upgradepage opens.4. Click the Browse button to navigate to the directory where youunzipped the upgrade file.5. Select the Review CIM Version Information? checkbox if you wouldlike information displayed about the versions of the CIMs in use.
