Chapter 13: Dominion KX II Local Console233 Ping interval (seconds) Timeout (seconds)1. Click Reset to continue. You will be prompted to confirm the factoryreset because all network settings will be permanently lost.2. Click OK button proceed. Upon completion, the Dominion KX IIdevice is automatically restarted.Resetting the Dominion KX II Using the Reset ButtonOn the back panel of the device, there is a Reset button. It is recessed toprevent accidental resets (you will need a pointed object to press thisbutton).The actions that are performed when the Reset button is pressed aredefined in the graphical user interface. See Encryption & Share (onpage 182).Note: It is recommended that you save the audit log prior to performing afactory reset. The audit log is deleted when a factory reset is performedand the reset event is not logged on the audit log. For more informationabout saving the audit log, see Audit Log (on page 191).To reset the device:1. Power off the Dominion KX II.2. Use a pointed object to press and hold the Reset button.3. While continuing to hold the Reset button, power the Dominion KX IIdevice back on.4. Continue holding the Reset button for 5-10 seconds. Once thedevice has been reset, two short beeps signal its completion.
