Appendix C: Informational Notes269SUSE/VESA Video ModesThe SuSE X.org configuration tool SaX2 generates video modes usingmodeline entries in the X.org configuration file. These video modes donot correspond exactly with VESA video mode timing (even when aVESA monitor is selected). The Dominion KX II, on the other hand, relieson exact VESA mode timing for proper synchronization. This disparitycan result in black borders, missing sections of the picture, and noise.To configure the SUSE video display:1. The generated configuration file /etc/X11/xorg.conf includes aMonitor section with an option named UseModes. For example,UseModes "Modes[0]"2. Either comment out this line (using #) or delete it completely.3. Restart the X server.With this change, the internal video mode timing from the X server will beused and will correspond exactly with the VESA video mode timing,resulting in the proper video display on the Dominion KX II.USB Ports and ProfilesVM-CIMs and DL360 USB PortsHP DL360 servers have one USB port on the back of the device andanother on the front of the device. With the DL360, both ports cannot beused at the same time. Therefore, a dual VM-CIM cannot be used onDL360 servers.However, as a workaround, a USB2 hub can be attached to the USB porton the back of the device and a dual VM-CIM can be attached to thehub.
