Chapter 7: Device Management1692. Click Remove.The selected profiles appear in the Available list. These profiles areno longer available for a KVM target server connected to this port.To apply a profile selection to multiple ports:1. In the Apply Selected Profiles to Other Ports section, select theApply checkbox for each KVM port you want to apply the current setof selected USB profiles to. To select all KVM ports, click Select All. To deselect all KVM ports, click Deselect All.Configuring Dominion KX II Local Port SettingsFrom the Local Port Settings page, you can customize many settings forthe Dominion KX II Local Console including keyboard, hot keys, videoswitching delay, power save mode, local user interface resolutionsettings, and local user authentication.For the KX2-832 and KX2-864, you are also able to configure theExtended Local port from the Local Port Settings page. The ExtendedLocal port may be connected to a Paragon switch or User Station toextend the reach of the local port. Like the Standard Local port, you areable configure keyboard, hot keys, video switching delay, power savemode, local user interface resolution settings, and local userauthentication settings.Note: The Extended Local port can be configured from both the RemoteConsole and the Local Console. See KX2-832 and KX2-864 Standardand Extended Local Port Settings (on page 173) for more informationon the Standard Local port and Extended Local port.To configure the local port settings:Note: Any changes you make to the settings on the Local Port Settingspage will restart the browser you are working in.1. Choose Device Settings > Local Port Settings. The Local PortSettings page opens.
