Chapter 2: Installation and Configuration244. Use the sliders to set the Mouse acceleration to 1.0 and Threshold to1.0.5. Click OK.To configure the video:1. From the Launcher, select Application Manager.2. Select System_Admin.3. Choose Smit > Devices > Graphic Displays > Select the DisplayResolution and Refresh Rate.4. Select the video card in use.5. Click List. A list of display modes is presented.6. Select a resolution and refresh rate supported by the Dominion KX II.See Supported Video Resolutions (on page 246) for moreinformation.Note: If you change the video resolution, you must log out of the targetserver and log back in for the video settings to take effect.Make UNIX Settings PermanentNote: These steps may vary slightly depending on the type of UNIX® (forexample, Solaris, IBM AIX) and the specific version in use.1. Choose Style Manager > Startup. The Style Manager - Startupdialog appears.2. On the Logout Confirmation dialog, select the On option. This optionprompts you to save your current session when you log out.Apple Macintosh® SettingsFor KVM target servers running an Apple Macintosh operating system,the preferred method is to use the D2CIM-VUSB and Absolute MouseSynchronization.Note: 'USB Profile 'Mac OS-X, version 10.4.9 and later' must be selectfrom the USB Profile menu or the Port Configuration page.Step 2: Configure Network Firewall SettingsTo access Dominion KX II through a network firewall via Multi-PlatformClient or through the Port Access page, your firewall must allowcommunication on TCP Port 5000 or another port that you designate.
