Regency LRI4E Owners & Installation Manual

Contents

LRI4E / HRI4E Direct Vent Gas Insert | 25|25installation919-350a 11.17.147361324HRI4E Pin LandingHRI6E Pin Landing1456. Place Log 4, match pin locator on Log 4 with landing pin on Log1. Angle the longest point on Log 4 is approximately 1/4' from theoutside edge of the burner tray.7. Place Log 5 across Log 4,match pin locator on Log 5 with landingpin on Log 4.Note: there are 2 pin locators on Log 5, lower locator is for HRI4Eunits and the upper locator is for the HRI6E units.8. Place Log 6 - rest on Log 3 as shown below.9. Place Log 7 on the glass as shown below.10. Place embers and Lava rocks on the glass as shown below.Note: Properly positioned, Logs 3 & 4 should measure 1/4" from theirlongest point to the outside edge of the burner tray.4 31/4" 1/4"1235. Place Log 3, rest on Log 2, match pin locator on Log 2 with landingpin on Log 1. Angle the longest point on Log 3 is approximately 1/4'from the outside edge of the burner tray.11. Reinstall Glass Door.12. Adjust aeration setting to fully open (manual for detailed instruc-tions)Note: Logs to be installed in NG units only.Line up pin locator and pin, Logs 1,3Line up pin locator and pin, Logs 1,4Line up pin locator and pin, Logs 5,4Position Log 6Position Log 7Place Lava Rock and Embers on Glass2HRI6E / HRI4E