123Screen Adjustment44 Screen Adjustment To use the Zoom/Position function after selecting Screen Fit in HDMI (1080i/1080p) orComponent (1080i/1080p) or Custom, follow these steps.1 Press the button to select Zoom/Position.2 Select Zoom or Position.3 Press the [ ] button.4 Press the / / / button to move the picture.5 Press the [ ] button.6 Select Close by pressing the and buttons sequentially.If you want to reset the picture to its original position, select Reset in the Zoom/Position screen.The picture will be set to its default position.4.3.3 PC Screen AdjustmentCoarse / Fine: Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, usethe Coarse function to adjust the frequency as best as possible (Coarse) and Fine-tune again. After thenoise has been reduced, re-adjust the picture so that it is aligned with the center of screen.Position: To adjust the PC’s screen position if it is not centered or does not fit the product screen. Pressthe or button to adjust the Vertical Position. Press the or button to adjust the HorizontalPosition.Image Reset: Resets the image to the default settings.This option is available when the input source is PC.4.3.4 Resolution SelectIf the picture is not normal even when the resolution of the graphics card is one of the following, you canoptimize the picture quality by selecting the same resolution for the product as the PC using this menu.Available resolutions: Off / 1024 x 768 / 1280 x 768 / 1360 x 768 / 1366 x 768This option is available when the input source is PC.4.4 Auto AdjustmentMENU [ ] Picture Auto Adjustment ENTER [ ]m
