175System88 SystemAnynet+ MenuThe Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to theproduct.8.16.2 Auto Turn Off (No / Yes)Setting an Anynet+ Device to turn Off automatically when the product is turned off. If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the productpowers off. May not be enabled depending on the device.Switching between Anynet+ Devices1 Press the TOOLS button, select Anynet+ (HDMI-CEC), and then press [ ].2 Select Device List, and then press the [ ] button.If you cannot find a device you want, select Refresh to refresh the list.3 Select a device, and then press the [ ] button. You can switch to the selected device.The Device List menu appears only when you set Anynet+ (HDMI-CEC) to On in the Systemmenu. Switching to the selected device may take up to 2 minutes. You cannot cancel the switchingoperation while switching is in progress. If you have selected an Anynet+ device by pressing the SOURCE button and then selectingits input source, you cannot use the Anynet+ function. Make sure to switch to an Anynet+device by using the Device List.Anynet+ Menu DescriptionView PC Changes Anynet+ mode to PC mode.Device List Shows the Anynet+ device list.(device_name) MENU Shows the menu of the connected device menus. E.g. if a DVD player isconnected, the disc menu of the DVD player will appear.(device_name) Tools Shows the tools menu of the connected device. E.g. if a DVD player isconnected, the tools menu of the DVD player will appear.Depending on the device, this menu may not be available.(device_name) Title Menu Shows the title menu of the disc in the connected device. E.g. If a DVDplayer is connected, the title menu of the movie in the DVD player willappear.Depending on the device, this menu may not be available.
