130Screen Adjustment44 Screen Adjustment4.8.1 Color ToneIf the input source is PC, DVI, DisplayPort or HDMI (PC connection). Off / Cool / Standard / WarmIf the input source is AV, Component, HDMI or TV Off / Cool / Standard / Warm1 / Warm2 Warm1 or Warm2 will be deactivated when the Picture Mode is Dynamic. Settings can be adjusted and stored for each external device connected to an input on theproduct.4.8.2 Color Temp.Adjust the color temperature (Red/Green/Blue). (Range: 3000K–15000K)This option is available when Color Tone is set to Off.4.8.3 Digital Noise FilterIf the broadcast signal received by your product is weak, you can activate the Digital Noise Filter featureto reduce any static and ghosting that may appear on the screen. Off / Low / Medium / High / Auto / Auto Visualization Auto Visualization: When changing analog channels, displays signal strength. Only available for analog channels. When bar is green, is that the best possible signal.When the signal is weak, try all the options until the the product displays the best picture.4.8.4 MPEG Noise FilterReduces MPEG noise to provide improved picture quality. Off / Low / Medium / High / AutoHDMI Dynamic, Standard,Natural, MovieColor Tone / Color Temp. / Digital Noise Filter / MPEGNoise Filter / HDMI Black LevelAV, Component,TV, HDMI (1080i)Dynamic, Standard,Natural, MovieColor Tone / Color Temp. / Digital Noise Filter / MPEGNoise Filter / Film ModeInput source Picture Mode Picture Options
