174System88 System8.16 Anynet+ (HDMI-CEC)MENU [ ] System Anynet+ (HDMI-CEC) ENTER [ ]8.16.1 Anynet+ (HDMI-CEC)What is Anynet+?Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+with your Samsung product remote. The Anynet+ system can be used only with Samsung devices thathave the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+logo on it. You can only control Anynet+ devices using the product remote control, not the buttons on theproduct. The product remote control may not work under certain conditions. If this occurs, reselect theAnynet+ device. The Anynet+ functions do not operate with other manufacturers’ products. For instructions explaining how to connect Anynet+ external devices, refer to the device’s usermanual You must connect an Anynet+ device using an HDMI cable. Some HDMI cables may notsupport Anynet+ functions. Anynet+ works when the AV device supporting Anynet+ is in the standby or on status. While in PIP mode, Anynet+ functions only when an AV device is connected as the primary display.It does not work if the AV device is connected as a secondary display. Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of thesame type. However, you can connect only one Anynet+ Home Theater. To connect an Anynet+ HomeTheate, connect the Home Theater to the product using an HDMI cable then.m
