145Network77 Network The product may not recognize the “Samsung Wireless LAN adapter” if you connect it to theproduct with a USB hub or USB extension cable other than the cable supplied with the product.7.1.4 Wireless Network SettingAutomatic Network SetupMost wireless networks have an optional security system that requires devices that access the networkto transmit an encrypted security code called an Access or Security key. The Security key is based ona Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked toenter when you set up security for your wireless network. If you use this method of setting up the networkconnection, and have a Security key for your wireless network, you will have to enter the Pass Phraseduring the the automatic or manual setup process.How to set up automatically1 Go to the Network Settings screen.2 Select Start, press [ ], and then press [ ] again.3 The Network function searches for available wireless networks. When done, it displays a list of theavailable networks.4 In the list of networks, press the or button to select a network, and then press the [ ] buttontwice.If the wireless router is set to Hidden (Invisible), you have to select Add Network and enter thecorrect Network Name (SSID) and Security key (Security key) to establish the connection.5 If the Enter security key screen appears, go to step 6. If you select a wireless router that does nothave security, go to step 8.6 If the router has security, enter the Security key (Security key or PIN). When you enter the Security key (Security key or PIN), use / / / buttons on yourremote to select number/ characters. Press the [ ] button to enter the characters. You can also enter numbers by pressing the number buttons on your remote.7 When done, use the right arrow button to move the cursor to Next, and then press [ ].8 The network connection screen appears and the verification process starts. When the connectionhas been verified, the “Your wireless network and Internet connection are setup and ready touse.” message appears. If the network does not accept the Security key (Security key or PIN), select Retry or selectIP Settings to enter the settings manually. If you want to set up the connection manually, select IP Settings. Then, go to the nextsection, “How to set up manually”.
