1407 Network7 Network7.1 Network Setting7.1.1 Connecting to a Wired NetworkThere are three ways to attach your product to your LAN using cable. You can attach your product to your LAN by connecting the LAN port on the back of your product toan external modem using a LAN cable. See the diagram below. You can attach your product to your LAN by connecting the LAN port on the back of your product toan IP Sharer which is connected to an external modem. Use LAN cable for the connection. See thediagram below. Depending on how your network is configured, you may be able to attach your product to your LANby connecting the LAN port on the back of your product directly to a network wall outlet using a LANcable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewherein your house. If you have a Dynamic Network, you should use an ADSL modem or router that supports theDynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCPautomatically provide the IP address, subnet mask, gateway, and DNS values your product needs toRJ45The Modem Port on the Wall External Modem(ADSL / VDSL / Cable TV)Modem Cable LAN CableLANThe Modem Port on the Wall External Modem(ADSL / VDSL / Cable TV) IP Sharer(having DHCP server)LANModem Cable LAN Cable LAN CableRJ45The LAN Port on the WallLANLAN CableRJ45
