Sanyo PLC-XC50 Owner's Manual

Also see for PLC-XC50 - 2600 Lumens: Manual Manual Specification sheet Owner's manual

Contents

10Top Control② LAMP REPLACE indicatorTurn yellow when the life of the projection lampdraws to an end. (pp.60, 71-72)④ WARNING FILTER indicator– Blink slow when the filter is being scrolled .(pp.57, 71)– Blink fast when the filter cartridge is notinstalled. (pp.57, 72)– Light orange when the clogging of the filter isdetected or the filter counter reaches a timeset in the timer setting, urging immediate filter/filter cartridge replacement. (pp.55, 57, 72)⑪ POWER ON/STAND-BY buttonTurn the projector on or off. (pp.18, 19)① POWER indicator– Light red when the projector is in stand-bymode.– Light green during operations.– Blink green in the Power management mode .(p.50)– Blink red during cooling down.⑧ MENU buttonOpen or close the On-Screen Menu. (p.20)⑤ POINT (▲▼) buttons– Select an item or adjust the value in theOn-Screen Menu. (p.20)– Pan the image in Digital zoom + mode.(p.36)⑥ SELECT button– Execute the selected item. (p.20)– Expand or compress the image in Digitalzoom mode. (p.36)Part Names and FunctionsPart Names and Functions⑦ POINT (◄►) buttons– Select an item or adjust the value in theOn-Screen Menu. (p.20)– Pan the image in Digital zoom + mode.(p.36)⑩ AUTO SETUP buttonExecute the setting of Auto setup (includesInput search, Auto PC adj. and Auto Keystonefunctions) in the setting menu.(pp.22,24,28,46)① ② ③ ④⑥⑦⑧⑨⑩⑪⑤③ WARNING TEMP. indicatorEmit a red light when the projector detectsan abnormal condition. This also blinks redwhen the internal temperature of the projectorexceeds the operating range. (pp.63, 71-72)⑨ INPUT buttonSelect an input source. (pp.25-26, 37-38)