Sanyo PLC-XC50 Owner's Manual

Also see for PLC-XC50 - 2600 Lumens: Manual Manual Specification sheet Owner's manual

Contents

25Computer InputChoose Computer 1 (Analog) or Computer 2 by pressingthe INPUT button on the top control or choose Computer1(Analog) by pressing the COMPUTER 1 button onthe remote control or choose computer 2 by pressingCOMPUTER 2 button on the remote control.Before using these buttons, correct input source should beselected through Menu operation as described below.Input Source Selection (RGB: Computer 1 (Analog)/Computer 2 )Direct OperationInput MenuInput MenuInput Menu iconComputer2Press the MENU button to display the On-ScreenMenu. Press the Point ◄► buttons to move the redframe pointer to the Input Menu icon.1Press the Point ▲▼ buttons to move the red arrowpointer to either Computer 1 (Analog) or Computer 2,and then press the SELECT button.2When selecting Computer 1 (Analog), RGB inputsource will be selected directly.When selecting Computer 2, the Source Select Menuappears. Move the pointer to RGB and then press theSELECT button.3Menu OperationNote:When the Input Search function is set On1 or On2, theinput signal will be searched automatically. (p.46)Computer 1 (Analog)Computer 2Computer 1 (Digital)Remote Control1 2+_COMPUTER 1 buttonCOMPUTER 2 buttonTop ControlINPUT buttonCOMPUTER 1 buttonVideoComputer 1 (Analog)Computer 1 (Digital)M o v e t h e p o i n t e r ( r e da r r o w ) t o C o m p u t e r1(Analog) and press theSELECT button.M o v e t h e p o i n t e r ( r e darrow) to Computer 2 andpress the SELECT button.Move the pointer (redarrow) to RGB.