Sanyo PLC-XC50 Owner's Manual

Also see for PLC-XC50 - 2600 Lumens: Manual Manual Specification sheet Owner's manual

Contents

Part Names and FunctionsRear Terminal③ MONITOR OUTThis terminal can be used to output the incomingRGB signal from COMPUTER IN 1 / DVI-Iterminal or COMPUTER IN 2/COMPONENT INterminal to the other monitor (p.14).① CONTROL PORTWhen the projector is controlled by a computer,connect to this jack with serial control cable.② COMPUTER IN / COMPONENT INConnect output signal from a computer, RGBscart 21-pin video output or component videooutput to this terminal. (pp.14,16)⑧ AUDIO INConnect the audio output from video equipmentconnected to ⑤ or ⑨ to this jack. (Whenthe audio output is monaural, connect it to L(MONO) jack.). (p.15)⑨ VIDEO INConnect the composite video output from videoequipment to VIDEO jack. (p.15)⑥ AUDIO OUT (VARIABLE)Connect an external audio amplifier to this jack.(pp.14 - 16)This terminal outputs sound from AUDIO INterminal (⑦ or ⑧).⑨ ⑧① ② ④ ⑤ ⑥③⑦⑤ S-VIDEO INConnect the S-VIDEO output signal from videoequipment to this jack (p.15).④ COMPUTER IN 1 / DVI-IConnect computer output (Digital/Analog DVI-Itype) to this terminal (p.14).⑦ COMPUTER1/ COMPUTER COMPONENTAUDIO INConnect the audio output (stereo) from acomputer or video equipment connected to ② or④ to this jack. (pp14, 16)