Sanyo PLC-XC50 Owner's Manual

Also see for PLC-XC50 - 2600 Lumens: Manual Manual Specification sheet Owner's manual

Contents

1 2+_Basic OperationPress the VOLUME+/– buttons on the top control or onthe remote control to adjust the volume. The volumedialog box appears on the screen for a few seconds.Press the MUTE button on the remote control to cut off thesound. To restore the sound to its previous level, pressthe MUTE button again or press the VOLUME +/– buttons.Mute function is also effective for AUDIO OUT jack.VolumeMuteDirect OperationSound Adjustment12Press the MENU button to display the On-ScreenMenu. Press the Point ◄► buttons to move the redframe pointer to the Sound Menu icon.Press the Point ◄► buttons to cut off the sound. Dialogbox display changes to "On" and the sound is cut off. Torestore the sound to its previous level, press the Point ◄►buttons again.Press the Point ▲▼ buttons to move the red framepointer to the item that you want to select, and thenpress the SELECT button.VolumeMutePress the Point ► buttons to turn up the volume, andpress the Point ◄ button to turn down the volume.Menu OperationRemote Control OperationFor some frequently used operations, using the remotecontrol is advisable.Just pressing one of the buttons enables you to make theoperation, and no need for calling up the On-Screen Menu.Press the FREEZE button on the remote control to freezethe picture on the screen. To cancel the Freeze function,press the FREEZE button again or press any other button.FREEZE buttonPr e ss t h e C O MPUTER or VIDEO or S-VIDEO orCOMPONENT button on the remote control to select theinput source. For more detail, see pages 25,26,37 and 38.COMPUTER/ VIDEO / S-VIDEO /COMPONENT buttons1 2+_Remote Control COMPUTER1/COMPUTER/VIDEO / S-VIDEO/COMPONENTbuttonsNote:See the next page for the other buttons.1 2+_FREEZE buttonRemote ControlTop ControlPress the MUTE button to set the Mute functionOn/Off. The display disappears after 4 seconds.Approximate level ofthe volume.Exit the Sound Menu.Sound MenuSound Menu iconVOLUME- buttonVOLUME+ buttonMUTE buttonVOLUME+/– buttonsApproximate levelof the volume.