Sanyo PLC-XC50 Owner's Manual

Also see for PLC-XC50 - 2600 Lumens: Manual Manual Specification sheet Owner's manual

Contents

1InstallationNotes:• The brightness in the room has a great influence on picture quality. It is recommended to limit ambientlighting in order to obtain the best image.• The values shown below are approximate and may vary from the actual sizes.Positioning the ProjectorScreen Size(W x H) mm4 : 3 aspect ratioZoom (min)40"Zoom (max)813 x 6105.5' (1.7 m)100"2032 x 152413.9' (4.2 m)11.6' (3.5 m)150"3048 x 228620.9' (6.4 m)17.4' (5.3 m)200"4064 x 304827.8' (8.5 m)23.2' (7.1 m)300"6096 x 457241.8' (12.7 m)34.8' (10.6 m)4.6' (1.4 m)11.6' (3.5 m)4.6' (1.4 m)17.4' (5.3 m)23.2' (7.1 m)34.8' (10.6 m)41.8' (12.7 m)For projector positioning, see the figures below. The projector should be set horizontally to the flat screen.Projection angle can be adjusted up to 10.0 degrees with the adjustable feet.Lift the front of the projector and push the feet locklatches on the projector.1Release the feet lock latches to lock the adjustablefeet and rotate the adjustable feet to adjust theposition and tilt.To retract the adjustable feet, lift the front of theprojector and push and undo the feet lock latches.Keystone distortion of the projected image can becorrected with the remote control or menu operation.(pp.22, 46)Adjustable Feet23Adjustable Feet Feet Lock Latches