Sanyo PLC-XC50 Owner's Manual

Also see for PLC-XC50 - 2600 Lumens: Manual Manual Specification sheet Owner's manual

Contents

6CSafety InstructionsOpenings in the cabinet are provided for ventilation and toensure reliable operation of the product and to protect itfrom overheating, and these openings must not be blockedor covered.CAUTIONHot air is exhausted from the exhaust vent. When usingor installing the projector, the following precautionsshould be taken.– Do not put any flammable object or spray can nearthe projector, hot air is exhausted from the ventilationholes.– Keep the exhaust vent at least 3' (1 m) away from anyobjects.– Do not touch a peripheral part of the exhaust vent,especially screws and metallic part. This area willbecome hot while the projector is being used.– Do not put anything on the cabinet. Objects put on thecabinet will not only get damaged but also cause firehazard by heat.Cooling fans are provided to cool down the projector.The fans’ running speed is changed according to thetemperature inside the projector.Air CirculationDo not roll the projector morethan 20 degrees from side toside.Do not point the projector up to project animage.Do not point the projector down to projectan image.Do not put the projector on either side toproject an image.Install the projector properly. Improper Installation mayreduce the lamp life and cause a fire hazard.Installing the Projector in ProperPositionUSE CAUTION IN CARRyING OR TRANSPORTINGTHE PROjECTOR– Do not drop or bump the projector, otherwise damagesor malfunctions may result.– When carrying the projector, use a suitable carryingcase.– Do not transport the projector by using a courier ortransport service in an unsuitable transport case. Thismay cause damage to the projector. To transport theprojector through a courier or transport service, consultyour dealer for their information.– Do not put the projector in a case before the projectoris cooled enough.Moving the ProjectorWhen moving the projector, close the slide shutter andretract the adjustable feet to prevent damage to thelens and cabinet. When the projector is not in usefor an extended period, put it into a suitable case toprotect the projector.When handling the projector, do not drop, bump,subject it to strong forces, or put other things on thecabinet.Air Intake VentExhaust Vent(Hot air exhaust)Air flowDo not pitch the projector morethan 20 degrees above andbelow.