Sanyo PLC-XC50 Owner's Manual

Also see for PLC-XC50 - 2600 Lumens: Manual Manual Specification sheet Owner's manual

Contents

6Computer InputWhen the Digital zoom + is selected, the On-Screen Menudisappears and the message "D. zoom +" is displayed.Press the SELECT button to expand the image size. Andpress the Point ▲▼◄► buttons to pan the image. ThePanning function can work only when the image is largerthan the screen size.A projected image can be also expanded by pressing theD.ZOOM ▲ button on the remote control.Digital zoom +When Digital zoom – is selected, the On-Screen Menudisappears and the message "D. zoom –" is displayed.Press the SELECT button to compress image size.A projected image can be also compressed by pressingthe D.ZOOM ▼ button on the remote control.To exit the Digital zoom +/– mode, press any button exceptthe D.ZOOM ▲▼ buttons, SELECT, and Point buttons.To return to the previous screen size, select a screen sizefrom the Screen Size Adjustment or select an input sourcefrom the Input Source Selection (p.26) again, or adjust thescreen size with the D.ZOOM ▲▼buttons.Digital zoom –For zooming in and out the images1 2+_Remote ControlD ZOOM ▲ buttonPOINT buttonsSELECT buttonD ZOOM ▼ buttonNotes:• The panning function may not operate properly if thestored Mode in the PC Adjust Menu is used. (p.30)• The minimum compression ratio can be limiteddepending on the input signal or when the Keystonefunction is working or when the Custom is selected forthe screen size.• True, Full, and Digital zoom +/– cannot be selectedwhen 480i, 575i, 480p, or 575p is selected in the PCSystem Menu. (p.27)• Digital zoom +/- cannot be selected when Full or Trueis selected.Vi