Sanyo PLC-XC50 Owner's Manual

Also see for PLC-XC50 - 2600 Lumens: Manual Manual Specification sheet Owner's manual

Contents

5CustomAdjust the screen scale and position manually with thisfunction.Press the SELECT button at Custom and the "Custom" isdisplayed on the screen for a few seconds and then theAspect dialog box appears.Scale H/V .................. Adjust the Horizontal/Vertical screenscale.H&V........................... When set to "On", the aspect ratiois fixed. The "Scale V" appearsdimmed and becomes unavailable.Adjust the "Scale H", then thescreen scale is automaticallymodified based on the aspect ratio.Position H/V............. Adjust the Horizontal/Vertical screenposition.Common ................... Save the adjusted scale to all theinputs. Press the SELECT button atCommon to display a confirmationbox. To save the scale, press theSELECT button at "Yes", WhenCustom is selected, the saved scaleis used.Reset......................... Reset the all adjusted values. Pressthe SELECT button at Reset todisplay a confirmation box. To reset,press the SELECT button at "Yes".Press the SELECT button atCommon or Reset, to displaya confirmation box.Computer InputNotes:• W h e n n o s i g n a l i s d e t e c t e d , " N o r m a l " i s s e tautomatically and the Aspect dialog box disappears.• The adjustable range for Scale H/V and Position H/Vis limited depending on the input signal.WideProvide the image to fit wide video aspect ratio (16:9) byexpanding the image width uniformly. This function can beused for providing a squeezed video signal at 16:9.FullProvide the full screen image.