Sanyo PLC-XC50 Owner's Manual

Also see for PLC-XC50 - 2600 Lumens: Manual Manual Specification sheet Owner's manual

Contents

Computer InputPress the MENU button to display the On-ScreenMenu. Press the Point ◄► buttons to move the redframe pointer to the PC Adjust Menu icon.Press the Point ▲▼ buttons to move the red framepointer to the item that you want to adjust and thenpress the SELECT button to display the adjustmentdialog box. Press the Point ◄► buttons to adjust thevalue.Manual PC AdjustmentSome computers employ special signal formats which may not be tuned by Multi-scan system of thisprojector. Manual PC Adjustment enables you to precisely adjust several parameters to match those signalformats. The projector has 5 independent memory areas to memorize those parameters manually adjusted.It allows you to recall the setting for a specific computer.12Eliminate flicker from the image displayed. Press thePoint ◄► buttons to adjust the value. (From 0 to 31.)Fine syncAdjust the number of total dots in one horizontal period.Press the Point ◄► buttons to adjust number to matchyour PC image.Total dotsPress the Point ◄► buttons to adjust the horizontal pictureposition.HorizontalPress the Point ◄► buttons to adjust the vertical pictureposition.VerticalPress the SELECT button to show H-sync freq. andV-sync freq. of the connected computer.Current modeAdjust clamp level. When the image has dark bars, trythis adjustment.ClampMove the red frame pointerto an item and press theSELECT button.PC Adjust MenuPC Adjust Menu iconPress the Point ◄►buttons to adjust thevalue.Status (Stored/Free)of the selected Mode.Selected ModePress the SELECT buttonat the Current mode item toshow the information of theconnected computer.