12Part Names and Functionsqwetuiow LAMP REPLACE indicatorLights yellow when the projection lamp reaches itsend of life (pp.65, 71).i WARNING indicator–Lights red when the projector detects an abnormalcondition.–Blinks red when the internal temperature of theprojector exceeds the operating range (pp.62, 71).e ON/STAND–BY buttonTurn the projector on or off (pp.22–23).o POWER indicator–Lights red when the projector is in stand-by mode.–Lights green during operations.–Blinks green in the Power management mode(p.52).r INPUT buttonSelect an input source (pp.30–31, 40–41).!1 MENU buttonOpen or close the On-Screen Menu (p.24).y POINT ed7 8 (VOLUME +/–) buttons–Select an item or adjust the value in the On-ScreenMenu (p.24).–Pan the image in the Digital zoom + mode (p.39).–Adjust the volume level (Point 7 8 buttons) (p.27).q ALARM indicatorBlinks red when informing the setting or batterystatus (pp.58–59).Top Controlry!0 AUTO SETUP buttonCorrect vertical keystone distortion and adjustcomputer display parameters such as Fine sync.,Total dots, and Picture position (pp.26, 47).!0!1u SELECT button–Execute the selected item (p.24).–Expand or compress the image in the Digital zoommode (p.39).t KEYSTONE buttonCorrect keystone distortion (pp.26, 48).