Sanyo PLC-XU110 Owner's Manual

Also see for PLC-XU110: Specifications Service manual

Contents

40Choose Video by pressing the INPUT button on the topcontrol or the VIDEO button on the remote control.Before using these buttons, correct input source should beselected through menu operation as described below.Use the Point ed buttons to move the red arrowpointer to Video and then press the SELECT button todisplay the Source Select Menu.12Move the pointer toVideo and press theSELECT button.VIDEOMove the pointer to the sourcethat you want to select andpress the SELECT button.Source Select Menu (VIDEO)Input MenuMove the pointer to the desired source and then pressthe SELECT button.3When selecting Auto, the projector automaticallydetects incoming video signal, and adjusts itselfto optimize its performance. The projector selectsconnection in the following order:1. S-video2. VideoAutoWhen video input signal is connected to theVIDEO jack, select Video.VideoWhen video input signal is connected to the S-VIDEO jack, select S-video.S-videoInput Source Selection (Video, S-video)✔Notes:•Wired, Wireless, and Memory viewer are for the Network function.See the owner’s manual “Network Set-up and Operation” andowner’s manual of Memory viewer (optionally available).•When the Input Search function is set to “On1” or “On2”, theinput signal will be searched automatically (p.51).Input Menu iconVideo InputComputer 1 (Analog)VideoComputer 2INPUT buttonVIDEO buttonWiredTop Control INPUT buttonComputer 1 (Digital)Remote ControlDirect OperationMenu OperationPress the MENU button to display the On-ScreenMenu. Use the Point 7 8 buttons to move the redframe pointer to the Input Menu icon.