Sanyo PLC-XU110 Owner's Manual

Also see for PLC-XU110: Specifications Service manual

Contents

15Part Names and FunctionsPRESENTATION POINTERbuttonR-CLICK buttonL-CLICK buttonWhile pressing the MENUbutton, press the IMAGEbutton number of timescorresponding to theremote control code.MENU buttonIMAGE buttonRemote Control CodeRemote Control Code Number of TimesPressing IMAGEButtonCode 1 1Code 2 2Code 3 3Code 4 4Code 5 5Code 6 6Code 7 7Code 8 8Wireless Mouse OperationThe remote control can be used as a wireless mouse for your computer. Before operating the wireless mouse,connect your computer and the projector with a USB cable (not supplied). See “Connecting to a Computer” onpage 19. When the Pointer function is used, the wireless mouse is not available.Acts as left (click) mousebutton while the projectorand a computer areconnected with a USBcable.Move the pointer on the screenwith this button.Acts as right (click) mousebutton while the projector and acomputer are connected with aUSB cable.The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remotecontrol codes prevents interference from other remote controls when several projectors or video equipmentnext to each other are operated at the same time. Change the remote control code for the projector first beforechanging that for the remote control. See “Remote control” in the Setting Menu on page 53.Press and hold the MENU and IMAGE buttons formore than five seconds to switch between the codes.The code switches sequentially for one pressing theIMAGE button. See the list below.1To initialize the remote control code, slide the RESET/ON/ALL-OFF switch to “RESET,” and then to “ON.”The initial code is set to Code 1.2