7Safety InstructionsOpenings in the cabinet are provided for ventilation. Toensure reliable operation of the product and to protect itfrom overheating, these openings must not be blockedor covered.CAUTIONHot air is exhausted from the exhaust vent. When usingor installing the projector, the following precautionsshould be taken.– Do not put any flammable object or spray can near theprojector, hot air is exhausted from the air vents.– Keep the exhaust vent at least 3’ (1 m) away from anyobjects.– Do not touch a peripheral part of the exhaust vent,especially screws and metallic parts. These areas willbecome hot while the projector is being used.– Do not put anything on the cabinet. Objects put onthe cabinet will not only get damaged but also maycause fire hazard by heat.Cooling fans are provided to cool down the projector.The fans’ running speed is changed according to thetemperature inside the projector.Air IntakeVentsExhaust VentExhaust Vent(Hot air exhaust)Air Intake VentCAUTION IN CARRYING OR TRANSPORTINGTHE PROJECTOR–Do not drop or bump the projector, otherwise damagesor malfunctions may result.–When carrying the projector, use a suitable carrying case.–Do not transport the projector by courier or any othertransport service in an unsuitable transport case. Thismay cause damage to the projector. For informationabout transporting the projector by courier or any othertransport service, consult your dealer.–Do not put the projector in a case before the projector iscooled enough.Moving the ProjectorWhen moving the projector, close the slide shutter andretract adjustable feet to prevent damage to the lens andcabinet.When the projector is not in use for an extended period,put it into the supplied carrying case with the lens side up.CAUTIONThe carrying case (supplied) is intended for protectionagainst dust and scratches on surface of the cabinet, andit is not designed to protect an appliance from externalforces. Do not transport the projector by courier or anyother transport service with this case, otherwise theprojector can be damaged. When handling the projector,do not drop, bump, subject it to strong forces, or putother things on the cabinet.Air Circulation