Sanyo PLC-XU110 Owner's Manual

Also see for PLC-XU110: Specifications Service manual

Contents

37Computer InputUse the Point 7 8 buttonsto adjust the setting value.Move the red framepointer to the desireditem and then pressthe SELECT button.Image Adjust MenuImage Adjust Menu iconSelected Image modeImage AdjustmentResetPress the MENU button to display the On-ScreenMenu. Use the Point 7 8 buttons to move the redframe pointer to the Image Adjust Menu icon.12 Use the Point ed buttons to move the red framepointer to the desired item and then press the SELECTbutton to display the adjustment dialog box. Use thePoint 7 8 buttons to adjust the setting value.✔Note:•When the White balance Red, Green, or Blue isadjusted, the Color temp. level will change to “Adj.”.Press the Point 7 button to decrease the contrast; pressthe Point 8 button to increase the contrast (from 0 to 63).Press the Point 7 button to decrease the brightness; pressthe Point 8 button to increase the brightness (from 0 to 63).ContrastBrightnessPress the Point 7 button to lighten red tone; press thePoint 8 button to deepen red tone (from 0 to 63).White balance (Red)Press the Point 7 button to lighten green tone; press thePoint 8 button to deepen green tone (from 0 to 63).White balance (Green)Press the Point 7 button to lighten blue tone; press thePoint 8 button to deepen blue tone (from 0 to 63).White balance (Blue)Use the Point 7 8 buttons to select the desired Color temp.level (High, Mid, Low, or XLow).Color temp.Use the Point 7 8 buttons to adjust the gamma value toobtain a better balance of contrast (from 0 to 15).GammaPress the Point 7 button to decrease the sharpness of theimage; press the Point 8 button to increase the sharpnessof the image (from 0 to 15).SharpnessTo reset the adjusted data, select Reset and press theSELECT button. A confirmation box appears and then select[Yes]. All adjustments will return to their previous figures.