Sanyo PLC-XU110 Owner's Manual

Also see for PLC-XU110: Specifications Service manual

Contents

39Computer InputSelect Digital zoom +. The On-Screen Menu disappears and“D. zoom +” appears. Press the SELECT button to expandthe image size. Use the Point ed7 8 buttons to pan theimage. The Panning function can work only when the imageis larger than the screen size.A projected image can be also expanded by pressing theD.ZOOM e button on the remote control.To exit the Digital zoom +/– mode, press any button exceptthe D.ZOOM ed buttons, SELECT, and Point buttons.Digital zoom +Select Digital zoom –. The On-Screen Menu disappears and“D. zoom –” appears. Press the SELECT button to compressimage size.The projected image can be also compressed by pressing theD.ZOOM d button on the remote control.Digital zoom –To return to the previous screen size, select a screen sizefrom the Screen Size Adjustment Menu or select an inputsource from the Input Source Selection Menu (see pages30–31) again, or adjust the screen size with the D.ZOOMed buttons.For zooming in and out the images✔Notes:•The panning function may not operate properly ifthe stored Mode in the PC Adjust Menu is used(p.35).•Minimum compression ratio can be limiteddepending on the input signal or when theKeystone function is working.• True, Full screen, and Digital zoom +/– cannotbe selected when 480i, 575i, 480p, or 575p isselected in the PC System Menu (p.32).•Digital zoom +/- cannot be selected when Fullscreen or True is selected.D.ZOOM + buttonRemote ControlSELECT buttonPOINT buttonsD.ZOOM – buttonAdjust the screen scale and position manually with thisfunction.Press the SELECT button at Custom and the “Custom” isdisplayed on the screen for a few seconds and then theAspect dialog box appears.Scale H/V............ Adjust the Horizontal/Vertical screen scale.H&V.................... When set to “On,” the aspect ratio isfixed. The “Scale V” appears dimmed andbecomes unavailable. Adjust “Scale H,”then the screen scale is automaticallymodified based on the aspect ratio.Position H/V ....... Adjust the Horizontal/Vertical screenposition.Common ............ Save the adjusted scale. Press theSELECT button at Common to display aconfirmation box. To save the scale, pressthe SELECT button at “Yes.” WhenCustom is selected, the saved scale isused.Reset.................. Reset the Common data. Press theSELECT button at Reset to display aconfirmation box. To reset, press theSELECT button at “Yes.”Custom✔Notes:•When no signal is detected, “Normal” is setautomatically and the Aspect dialog box disappears.•The adjustable range for Scale H/V and Position H/Vis limited depending on the input signal.Press the SELECT button atCommon or Reset, to display aconfirmation box.